TORQUEWhen Your Door
Stops Moving,
We Start.
We fix what holds your home together — torsion systems, weather-split panels, openers that have forgotten how to listen. Two thousand pounds of steel, recalibrated right.
4.9 · 2,400+ reviews
Spring tension
12.4 kN
Cycle rating
50k cycles
Springs that snap aren't just inconvenient — they're dangerous.
A garage door torsion spring stores 350–600 foot-pounds of torque when wound. When it fails, that energy releases in a fraction of a second. We replace both springs simultaneously, calibrate to your door's exact weight, and set tension within ±2% of spec.
Most shops replace one spring to save the customer money. We replace both — because the surviving spring is already at 60–80% of its fatigue life, and a second failure means a second service call.
- Dual-spring replacement standard on every job — no upselling required
- High-cycle springs rated for 25,000–50,000 cycles (3–5× standard)
- Torque calibration verified with digital tension gauge before we leave
- Lifetime warranty — if it breaks again, we fix it. No charge.
Load path
Nominal
Roller wear
12% / yr
A dented panel is a structural problem, not just a cosmetic one.
Steel panels transfer load through the door's section joints. A compromised panel changes how force distributes across the track, accelerates roller wear, and stresses the bottom bracket — the point most likely to cause a cable snap. We assess the full system, not just what's visible.
Weather-split panels on wood doors and impact-dented steel sections both alter the door's balance point. A door that's 8 lbs heavier on one side puts 200+ additional cycles of stress on that side's spring annually.
- Single-panel replacement matched to existing texture and color
- Track realignment included on any panel job — we reset the geometry
- Roller and hinge inspection on every panel service
- Section joint sealing to prevent future weather intrusion on wood doors
Force limit
28 lbs ✓
Sensor gap
6mm / OK
An opener that ignores commands has a reason. We find it.
Modern openers communicate through radio frequency, safety sensor logic, and force-limit programming. When they stop responding, the failure is almost never the motor — it's a sensor misalignment, a logic board fault, or a force setting that's drifted outside spec. We diagnose before we replace.
Replacing an opener when the real issue is a 4mm sensor misalignment costs the homeowner $300 unnecessarily. Our diagnostic protocol checks 14 parameters before recommending replacement — and we document every reading.
- Full 14-point diagnostic before any replacement recommendation
- Sensor realignment and force-limit reprogramming included in service call
- Smart opener upgrades with WiFi, battery backup, and camera integration
- Programming of all remotes and keypads — including cars with HomeLink
Real doors. Real homeowners.
Real names.
“Marcus showed up in 39 minutes. He had the spring replaced and the door balanced before I finished my coffee. First time I've seen a tech actually use a torque wrench on a spring job.”
Sandra Kowalski
Naperville, IL
Tech: Marcus T.
“Called at 7am with a snapped cable. Ray had it repaired and both springs replaced by 9. He walked me through what failed and why — showed me the wear pattern on the old cable. Real professional.”
Derek Okonkwo
Aurora, IL
Tech: Ray V.
“Managing 12 units and these guys are the only crew I trust. They keep records on each door, remind me when springs are due, and show up when they say they will. That last part alone is worth everything.”
Priya Mehta
Schaumburg, IL
Tech: Team Torque
“Listing was going live Thursday. Opener was dead, panel was dented. Luis came out Wednesday, replaced the opener, popped the panel, adjusted the sensors. Photographer got the shot. House sold in 4 days.”
Jeff Castellano
Joliet, IL
Tech: Luis M.
“Kids locked the car in the garage when the opener died. Marcus was there in 41 minutes, had us back in business in 20. The lifetime warranty on the spring is real — I called 14 months later and they honored it, no questions.”
Tamara Nguyen
Wheaton, IL
Tech: Marcus T.
“Ray diagnosed a bent track I'd been ignoring for two years. Showed me how it was stressing the opener motor. Fixed the track, lubed everything, and the door sounds like a new machine. Night and day difference.”
Brian Holloway
Downers Grove, IL
Tech: Ray V.
“Marcus showed up in 39 minutes. He had the spring replaced and the door balanced before I finished my coffee. First time I've seen a tech actually use a torque wrench on a spring job.”
Sandra Kowalski
Naperville, IL
Tech: Marcus T.
“Called at 7am with a snapped cable. Ray had it repaired and both springs replaced by 9. He walked me through what failed and why — showed me the wear pattern on the old cable. Real professional.”
Derek Okonkwo
Aurora, IL
Tech: Ray V.
“Managing 12 units and these guys are the only crew I trust. They keep records on each door, remind me when springs are due, and show up when they say they will. That last part alone is worth everything.”
Priya Mehta
Schaumburg, IL
Tech: Team Torque
“Listing was going live Thursday. Opener was dead, panel was dented. Luis came out Wednesday, replaced the opener, popped the panel, adjusted the sensors. Photographer got the shot. House sold in 4 days.”
Jeff Castellano
Joliet, IL
Tech: Luis M.
“Kids locked the car in the garage when the opener died. Marcus was there in 41 minutes, had us back in business in 20. The lifetime warranty on the spring is real — I called 14 months later and they honored it, no questions.”
Tamara Nguyen
Wheaton, IL
Tech: Marcus T.
“Ray diagnosed a bent track I'd been ignoring for two years. Showed me how it was stressing the opener motor. Fixed the track, lubed everything, and the door sounds like a new machine. Night and day difference.”
Brian Holloway
Downers Grove, IL
Tech: Ray V.
Door frozen?
We're 47 minutes away.
Free diagnostic. No trip charge. No obligation. We show up, we tell you exactly what's wrong, and we give you a flat price before we touch a thing.
Get Your Free DiagnosticAvailable 24/7 · Same-day service · Licensed & insured